Automatic Control Turnkey Project Potato Starch Making Equipment

Automatic Control Turnkey Project Potato Starch Making Equipment

CZPT Control Turnkey Venture Potato CZPTch Producing CZPT


 1. Potato CZPTch can be utilised for Food and drink.

 2. Potato CZPTch can be utilised for Textile starching, Medicine, and so on.

 3. Potato CZPTch can be used for making Modified starch, Glucose, Suger, Sorbitol, Alchol, and so forth.

 4. Potato CZPTch can be utilized for producing Vitamin C, Lysine, Citric acid, Antibiotic, Enzymic preparations, and so on.

 5. Potato residue can be utilised as feed.

Method Description

(one) Raw materials acquiring device: The potato is carried aside from the storage pool soon after weighing. First of all, it goes through the vibration sieve for eliminating the stones and sand. Then the pre-cleaned potato falls on the belt conveyer and enters into the storage pool, and the rubbish will be carried away by truck.

(2) Drinking water transport unit: The exit of the storage pool is h2o transportation channel. The potato will be sent by drinking water force into de-stone equipment. In the meantime, the remaining sand and dirt will be once again cleaned out by rolling and friction.

(3) De-stone and washing unit: Potato is transferred into the screw destone equipment to be cleaned by drinking water circulation. The small sand and stone go by way of the rotary monitor then satisfy with even bigger dimension stone which was stopped and despatched back again to the entrance of de-stone equipment. Most of sand and stone are removed out of de-stone machine. The potato then goes into rotary cleansing equipment for even more removing of dust and broken chips. Cleaned potato falls on a examining conveying belt geared up with nozzles for washing the surface area of potato. Employees can manually just take out the rotten potatos, wooden and plastic products. At the stop of belt, the iron remover is put in for taking away metal impurities.
Then the potato is despatched by bulk elevator into short-term storage in which it can keep two several hours.

(four) Milling unit: The milling unit is the most critical stage for extracting potato starch. The feeding screw merged at base of the storage tank pumped the cleanse potato into milling equipment. Very-effective milling equipment will launch the starch in potato at most.

(five) De-sanding cyclone device: After milling, the starch milk is transferred to de-sanding cyclone by fiber pump. The hydro-cyclone divide the milk into two parts: the gentle component which is made up of the mixture of starch and residue will go out from leading of the cyclone, and the heavy part which contains the sand will be discharged out of the method.

(6) Centrifugal extracting unit: The combination is transferred to the three stage centrifugal sieves, each sieve works with a fiber pump and a defoam pump. The combination enters into each sieve to different residue and starch. After three levels ongoing washing and separation, the filtrate is sent to focus and refining unit, and the residue is despatched to the residue dewatering unit.

(seven) Potato residue dewatering unit: The potato residue will be pumped to the centrifugal sieve for dewatering, the centrifugal sieve performs like the extraction sieve. Then the screw conveyor discharges the residue out of the procedure, and the drinking water will go again to the approach drinking water system.

(8) Focus and refining unit

The starch milk from centrifugal sieve goes into the sixteen levels of refining hydro-cyclone, and refreshing drinking water arrives into the cyclone from the stop of method. Firstly, starch milk is pumped into three stages of focus unit to eliminate the water, then the condensed starch milk enter the next 13 levels of washing unit, and the overflow enters into an additional two stages of recycle unit to recycle starch. Most of the effluent with fiber is discharged out of the procedure, and a tiny component goes back again to the approach h2o method. Finally, the condensed starch slurry is pumped into the starch slurry storage tank.

(nine) Vacuum dewatering device: The starch slurry is pumped into inlet tank of vacuum dewatering device. Then the vacuum rotary drum will adsorb the starch on the drum floor and the filtrate is transferred out of the system by filtrate pump. The filter cake on the drum will be peeled off by peeler and then transferred to the air dryer by screw conveyor.

(10) Air drying device: After dewatering method, the air dryer will dry the starch to the essential dampness of the business starch. Then starch goes into the screw conveyor.

(11) Sieving and storage device: The starch is transferred into the vibration sieve by screw conveyor, and the sieve is used to separate the coarse and good starch particle. Then the fine starch goes into starch tank for short term storage.

(twelve) Weighing and package deal unit: Following seiving, the fine starch goes to the vehicle-packager, and will be packed into twenty five kg/bag.


Welcome to Speak to US!

ZheJiang Meckey CZPT Co.


Add: Bldg.5-1511, No. ten CZPT south road, BDA, ZheJiang

Automatic Control Turnkey Project Potato Starch Making Equipment


gear pump

As one of leading gear pump manufacturers, suppliers and exporters of mechanical products, We offer gear pump and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of gear pump

Recent Posts